Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Cut-out worktop suitable for 6 GN 1/3 trays.
Certified safety CE requirements.
Frontal and easy access to all components in the cooling unit.
Stainless steel lid for non-operating periods.
Fully removable cooling unit to facilitate maintenance.
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
No cross-contamination between upper and lower part (nothing will fall in the lower compartment).
Adjustable temperature range from -2 °C to +10 °C to suit meat, fish and dairy storage requirements.
Hot gas automatic evaporation of defrost water.
Large digital white-digit display with humidity selection button (3 preset level), internal temperature display and setting, manual activation of defrost cycle and turbo frost cycle (to rapidly cool warm loads).
Equipped with Optiflow forced air circulation system for rapid cooling and temperature distribution within the cell.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Tropicalized unit.
Anti-tilt runners accept GN 1/1 containers.
Self closing stainless steel doors (< 90°).
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
External bottom panel in stainless steel.
External back panel in galvanized steel.
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
Built-in refrigeration unit.
Large front working top (400 mm depth).
Interior base with rounded corners, pressed from a single sheet.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
3 compartments with 3 doors.
Anti-drip profile on stainless steel worktop edge.
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Fault code display.
Mounted on Stainless steel legs to give 150 mm clearance for ease of cleaning the floor.
Worktop in AISI 304 Stainless steel with a 50 mm profile.
